Solar Ground Mounting System is typically applied on flat open field ground. Main components are high pre-assembled in our factory, which save lots of your on site installing time and cost. Components are full sides anodized even for small parts, which has a great anti-corrosion effect and long lifetime.

Solar ground ramming pile mounting system is applied to residential, commercial and utility scale PV projects on non-sandy ground. It suits both framed or frameless solar panel installations, especially on uneven terrain. It works for level ground too.

The Solar Farm Mounting System is suitable for open field area. Dual-use of land improve the economic benefit.

Solar Ground carbon steel mounting system open field, this is a new type of installation using C-shaped carbon steel pole,High strength material and superior

The main material of the pv ground mounting system is high-purity aluminum alloy, which is light in weight, pre-assembled components are simple structural design, effectively reducing the onsite  cost. The support surface is anodized, with high corrosion resistance. The ground system with ground screws foundation has strong environmental adaptability and can be widely used in power station solar ground projects in different terrains. High pre assembly reduces on-site installation difficulties encountered. Light material, easy for install & delivery. Suitable for terrains environmental High pre-assembled in factory, save your on site cost & time 12 years warranty and 25 years service life Component List    Installation Site Open Field Area_Aluminum ground mounting system    Installation Base Ground screws and concrete foundations optional Tilt angle 0°- 45°    Max Wind Speed < 60m/s    Snow Load < 80cm    Standards AS/NZS 1170 &JIS C 8955-2011     Material Al6005-T5 for aluminum profiles and clamps.Stainless steel for fasten bolt and nut.     Anti-corrosive  Anodized     Warranty / Duration  12 years/ More than 25 years

The steel solar ground installation structure is designed for large-scale commercial use on the ground and can be used with grounding screws or concrete bases.

Special greenhouse Agricultural Solar Mounting Systems allow crops to grow at a suitable temperature, increasing yields while allowing sunlight to be utilized. Farmers can fully exploit the sun energy for daily basic activities like irrigation, heating and lighting.  A solution with enough space, benefits to the machine work Excellent anti-corrosive performance Pre-assembled components, Customed shading rate     Installation Site Open Field Area, Above the planting Farmland    Installation Base Ground screw, ground clearance Over 1800mm Tilt angle Customized tilt angle Module orientation Landscape/portrait    Max Wind Speed < 60m/s    Snow Load < 80cm    Standards AS/NZS 1170 &JIS C 8955-2011    Material      Material: Anodized aluminum 6005 T6 stainless steel 304, 410; Hot-dipped galvanized steel Q235B    Warranty / Duration  12 years/ More than 25 years

Single Solar Tracking system improves power generation efficiency. single-row tracking bracket pv system can adapt to the 20% slope of the north and south slopes,