L feet brackets mainly applied to trapezoidal metal sheet roofs and corrugated metal sheet. It can be directly fixed on the roof beam with screw. Hanger bolt and Screw St6.3x80 apply to install on steel beam and Wooden beam. Making installation faster, competitive and reliable. Systems are fully compliant with international standards on wind & snow load.
Low fitting costs
Every size of module array possible
Height adjustable via elongated hole in the sheet metal bracket
Suitable for large distances between rafters
Installation Site
Trapezoidal
and corrugated sheet metal
Fastening
Riveted or screwed onto raised corrugated
Economic layout
Landscape/portrait
Max Wind Speed
< 60m/s
Snow Load
< 80cm
Standards
AS/NZS 1170, DIN 1055, JIS C 8955:2011
Material
Anodized aluminum 6005 T6 , Fasten bolt and nut
stainless steel 304
Anti-corrosive
Anodized
Warranty / Duration
12 years/ More than 25 years
Details
The metal roof mounting system is suitable for roofing with corrugated sheet metal, trapezoidal metal sheet. L Feet .Tin roof solution, is available for almost all type of tin roof. Product designed with high strength which can resist max wind speed at 60m/s. Main material is AL6005-T5 with average 12μm anodizing film. Fasteners are stainless steel material which featured with high strength and high anti-corrosion.
Low fitting costs
Every size of module array possible
Height adjustable via elongated hole in the sheet metal bracket
Suitable for large distances between rafters
Details
Installation Site
Trapezoidal and corrugated sheet metal
Fastening
Riveted or screwed onto raised corrugated
Economic layout
Landscape/portrait
Max Wind Speed
< 60m/s
Snow Load
< 80cm
Standards
AS/NZS 1170, DIN 1055, JIS C 8955:2011
Material
Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304
Anti-corrosive
Anodized
Warranty / Duration
12 years/ More than 25 years
KLIP-LOK 406 Roof Hook , simply attached to the standing seams. Multiple types of clamps can be matched according to the Pitched roof mounting, so that it can be tightly clamped to ensure the firmness of the entire system. Aluminum hook & C block & Socket Head Screw. AL6005-T5 ,Clean Anodized with 12μm anodizing film thickness; SUS 304 for fastener material
Directly connect with rail, side fixed
Low fitting costs
Every size of module array possible
For all common rather distances
Details
Related Products
Tile roof hooks are applied to solar installation on slate tiles, The tile hooks are compatible with most common rails and are made of stainless steel,
Kinsend's
New ECO SYSTEM Is a more lightweight and easy to install system. Fix the 406
cliplock on the rooftop metal plate and
tighten the bolts. Fix the ECO rail on the 406 cliplock with Hex screw. PV
module on the ECO Rail with mid clamps and end clamps.
Ground mounting system is made of aluminum to mount on concrete foundation or ground screws,Quick installation with large-scale ground photovoltaic system power station construction progress.
The steel solar ground installation structure is designed for large-scale commercial use on the ground and can be used with grounding screws or concrete bases.
Fast Installation Solar Carport Racking,The N-shaped structure is more streamlined, reducing the cost of the entire carport system and reducing obstruction to vehicles.
High suitability carport mounting system with panels horizontally layout , and solar installations in both waterproof and non waterproof carport structure are optional.