Carbon Steel Solar Ground Mounting System_ U Rail

The steel solar ground installation structure is designed for large-scale commercial use on the ground and can be used with grounding screws or concrete bases.

The balcony solar mount system is made of high-corrosion aluminum, lightweight and high-corrosion, and can be installed at different angles according to the requirements of sunlight exposure conditions.

Helical ground screw is screw equipped with bigger blades than general one, which provides better pulling resistance performance, suitable for soft clay.

Tile roof hook kit solar mounting systems is designed for solar installation on most types tile roofs. Applicable to Portrait & Landscape orientation panel layout. Made of SUS 304 and firmly bottom fixing. Multiple styles of adjustable and fixed tile hooks. Pre-assembled Components Save Onsite Installation Time Flexibility and Adjustability Suitable for installing framed and frameless modules Safety & Reliable    Installation Site Pitched roof with tiles    Installation Base Slate tile roof Roof Pitch Up to 60° Module orientation Landscape/portrait    Max Wind Speed < 60m/s    Snow Load < 80cm    Standards AS/NZS 1170 &JIS C 8955-2011    Material ·   Stainless steel 304 Hook    Warranty / Duration  12 years/ More than 25 years

The metal roof mounting system is suitable for roofing with corrugated sheet metal, trapezoidal metal sheet. L Feet .Tin roof solution, is available for almost all type of tin roof. Product designed with high strength which can resist max wind speed at 60m/s. Main material is AL6005-T5 with average 12μm anodizing film. Fasteners are stainless steel material which featured with high strength and high anti-corrosion.  Low fitting costs Every size of module array possible Height adjustable via elongated hole in the sheet metal bracket Suitable for large distances between rafters Details    Installation Site Trapezoidal and corrugated sheet metal Fastening Riveted or screwed onto raised corrugated Economic layout Landscape/portrait    Max Wind Speed < 60m/s    Snow Load < 80cm    Standards AS/NZS 1170, DIN 1055, JIS C 8955:2011     Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304     Anti-corrosive  Anodized     Warranty / Duration  12 years/ More than 25 years