KINSEND Projects | Solar Farm Mounting System,Solar Ground Mounting System

Solar Ground Project 980KW , UK
Solar Ground Project 980KW ,UK was successfully completed, and the foundation was directly stabilized by the ground screws, and the bracket was installed on the ground. The safety performance of photovoltaic support is relatively high. Photovoltaic support has high accuracy, and the length of guide rail is accurate to millimeter. During construction, the second cutting is not carried out due to to...
Solar Ground Project 13MW , Japan
The Solar Ground Project 13MW , Japan was successfully completed, and we designed a ground strengthening structure according to the winding and uneven terrain. The solar support system can adjust the horizontal angle slightly according to the needs, which is firm and reliable, and can withstand atmospheric erosion, wind load and other external effects. Safe and reliable installation, with minimum ...
Solar Ground Project 872KW , Japan
Solar Ground Project 872KW , Japan was successfully completed, and the distance of photovoltaic support was measured at the installation site. When the installation site was too hard, or there was too much gravel, it was inconvenient to hammer the column directly into the ground, the ground screw could be selected. Before installation, geological soil testing should be done to determine the approp...
Solar Ground Project 980KW , Japan
Solar Ground Project 980KW , Japan was successfully completed, and the whole photovoltaic support was made of anodized AL6005-T5, which provided a portable solution. All solar components were pre-cut and pre-drilled, which was convenient for assembly at the installation site, saving time and labor cost. High-performance all-anodized materials provide lasting durability and service life of over 25 ...
Solar Ground Project 1.2MW , Japan
Solar Ground Project 1.2MW , Japan was successfully completed, and Kinsend made precise calculation and measurement in order to place, install and fix the required solar panels. solar Aluminum brackets were used to meet the extreme weather conditions, and spiral ground screws were widely used in the United States, Australia and Europe, which could meet various engineering requirements such as comp...
Solar Ground Project 13MW , Japan
Solar Ground Project 13MW , Japan was successfully completed, and the installation of Kinsend aluminum bracket was quick. Because the photovoltaic bracket adopts a special galvanized carbon steel aluminum alloy carbon steel rail, which can be linked with the connecting card at any position, it can not only improve the high pre-installation rate, but also greatly reduce the installation ...
Solar Ground Project 860KW , Japan
Solar Ground Project 860KW , Japan was successfully completed, and the whole set of solar supports were made of aluminum profiles. Hot-dip galvanized steel ground screws with spiral blades were used under the front and rear columns of photovoltaic supports. The construction speed was fast. For the uneven ground environment, the vegetation in the site was protected to the maximum extent, and the si...
Solar Ground Project 6.3MW ,Japan
Solar Ground Project 6.3MW ,Japan was successfully completed and received good feedback. Kinsend adopts solar aluminum bracket and has strong adaptability: the good modular design makes the photovoltaic bracket equipment itself highly adaptable to the environment; In terms of durability and environmental protection, aluminum materials are all treated by 10-12um oxidation meeting the specifications...
Solar Ground Project 16.6MW , Japan
Solar Ground Project 16.6MW was successfully completed, The whole set of cases uses aluminum alloy ground solar support design, which achieves zero-loss high-quality solar system effect, without worrying about the destruction of raw materials in solar production process, and has high photovoltaic efficiency, which is very safe and reliable. Higher strength, stronger wind resistance and snow p...

1 ... 7 8 9 10 11

A total of 11 pages

HOT PRODUCTS

Hot Sale Solar Mounting Solutions recommend for you

Ground Mounting System Ground Screw W Type

Ground mounting system is made of aluminum to mount on concrete foundation or ground screws，Quick installation with large-scale ground photovoltaic system power station construction progress.

C Steel Ground Moungting System C Rail

The steel solar ground installation structure is designed for large-scale commercial use on the ground and can be used with grounding screws or concrete bases.

Ground Mounting System _Sandy Area

Double blade ground screw foundation ground system, suitable for sandy environment, with strong structural stability,

Tile Roof Hook

Use universal stainless steel roof hook for tile roof rack mounting system，stainless roof hook installation with Self-tapping screw M6.3*80mm

Solar PV Mounting Tin Roof Hooks Aluminum L Feet Heightening type

Kensend's lengthened type L foot hook is widely used in PV systems in Korea and Europe for trapezoidal metal tin roof PV mounting systems.

Aluminum Solar Carport_N Type

Fast Installation Solar Carport Racking，The N-shaped structure is more streamlined, reducing the cost of the entire carport system and reducing obstruction to vehicles.

High Flexibility Carport Mounting System_W Type

High suitability carport mounting system with panels horizontally layout , and solar installations in both waterproof and non waterproof carport structure are optional.

Tile Roof Mounting System

Solar Stainless Steel Hook ,Custom-made solar tile hooks based on tile specifications,They have adjustable and fixed tile hook type for choice.