-
ABOUT USXiamen Kinsend Metal Tech Co., Ltd., is the main subsidiary of Fujian Shuangheng Group, which specialized in the designing and manufacturing of aluminum profiles over 30 years,with factory covering an area of 800,000 square meters.
-
PRODUCTSKinsend offers solar PV mounting solutions supported by a veteran R&D team, which provides tailored efficient design as per customer’s budget and project conditions.
-
PROJECTS
-
-
CONTACT US
undefined
PRODUCTS
L Feet Kits Metal Roof With Steel Beam, 165mm Height
Metal Roof Solar Mounting System Solar Hanger Bolt Solar L Feet ,Parts have been high pre-assembly on factory to save your installation time.Install in Trapezoidal and corrugated sheet metal. Height adjustable via elongated hole in the sheet metal bracket. Low fitting costsEvery size of module array possibleHeight adjustable via elongated hole in the sheet metal bracketSuitable for large distances between rafters Installation Site Trapezoidal and corrugated sheet metalFasteningRiveted or screwed onto raised corrugatedEconomic layoutLandscape/portrait Max Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170, DIN 1055, JIS C 8955:2011 Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years
Klip Lok Solar Roof Mounting Clamp
Product HighlightsKlip Lok Seam Dedicated Fit —— Snugly locks roof seam, no damage to original roof waterproof layerStable Solar Panel Fixing —— Holds panels firmly under harsh weather, reduces later maintenance needsQuick Easy Installation —— Simplifies on-site operation, cuts unnecessary construction stepsAnti-corrosion Surface Treatment —— Adapts to long-term outdoor use, extends whole service lifeProduct IntroductionThis Klip Lok Solar Roof Mounting Clamp is a specialized connecting hardware for photovoltaic system installation onKlip Lok standing seam metal roofs. It is designed to fasten solar mounting support rails directly tothe roof seam structure, without needing to drill holes through the roof surface. It avoids the hidden leakage risk brought by traditionalperforated roof installation methods.The product is developed following general photovoltaic accessory manufacturing specifications, to matchmost mainstream solar panel mounting systems on the market. Its reasonable structural design takes intoaccount the common load demand of rooftop solar projects, to deliver reliable performance in long-term outdoor operation scenarios.Applicable Scenarios—— Deploying new residential rooftop solar systems on Klip Lok metal sheet roofs—— Retrofitting extra solar panels on existing Klip Lok industrial factory roofs—— Replacing aged mounting clamps for small commercial distributed solar stations—— Re-fastening loosened solar fixtures after extreme weather strikes on rooftop PV projectsFriendly Reminders—— Please confirm the actual dimension of your Klip Lok roof seam before ordering for proper matching—— Do not apply this clamp on non-Klip Lok structure roofs without professional load verification—— Please operate in accordance with standard PV installation procedures to ensure overall structural safety This article was generated by AI and is for reference only.
Single Solar Tracking system improves power generation efficiency. single-row tracking bracket pv system can adapt to the 20% slope of the north and south slopes, Overall power generation efficiency increased by 25%-35%. The entire structure has extremely strong corrosion resistance throughout its entire service life. Pre-assembled in factory, save the onsite installing time and costHot dipped galvanized Steel Q235B or ZAM steel Strong structure suit for ground screws and concrete foundation10 years warranty and 20 years service life Installation Site Open ground clay soil /complex terrain Installation Base Concrete Base or Ground screw or PileTilt angleTracking range : ±60°North-south land slope＜20%Panel placementSingle row vertical Max Wind Speed ＜47m/s，3seconds gust Snow Load ＞500mm Standards AS/NZS 1170 &JIS C 8955-2011 Material Hot Dip galvanizing for Q235 or ZAM Steel Stainless steel for fasten bolt and nut Warranty / Duration 12 years/ More than 25 years
High Stability Rail Metal Roof System
High Stability solar rail has strong stability and a square structure in the middle, which reduces the overall weight of the rail and provides high safety. It is suitable for use in environments with high wind speeds. The reasonable combination of the rail with the metal roof system can reduce costs and improve the safety period. - Lightweight material: easy to transport and install- High corrosion resistance: Anodizing even after handling small parts- Lower cost of the whole system- 12 years warranty, more than 25 years service life Install site Open FieldMax Wind Speed ≤60m/sSnow Load ≤1.4KN/M2Tilt Angle ≤45 degreeApplicable Module Framed or framelessStandards AS/NZS 1170, ASCE 7-10, JIS2017Material Carbon steel, AL6005-T5, SUS304Anti-corrosive AnodizedColor Silver/BlackFoundation Metal rooftopWarranty 12 years warranty
High Safety Carport Mounting System
Solar carport bracket adopts thicker profiles, which can increase the span to make the carpark more concise and safe, We have provided different design solutions for single row and double row parking lots. They are suitable for modules of any size. Excellent waterproof performanceHigh corrosion resistance, anodized aluminum profilesHigh pre-assembly on factory to save your installation time Building on parking lot, saving land resources Installation Site Open Field Area, or Supper Mall Parking Area Installation Base Concrete base, Ground Clearance Over 2000mmTilt angleUp to 20° or Customized tilt angleEconomic layout3 rows of modules with vertical assembly6 rows of modules with horizontal assembly Max Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170 &JIS C 8955-2011 Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years
Higher Column Farm Mounting Systems_Adjustable Ground Screw
The Solar Farm Mounting System is suitable for open field area. Dual-use of land improve the economic benefit. Over 1800mm ground clearance, For higher space and convenient planting of crops, adjustable ground screws can be adopted. To ensure enough space, benefits to the machine work. Pre-assembled components, to save the installation time and cost. Adjustable ground screw foundation, increasing spaceDual-use of landPre-assembled in factoryDesigned as per customers requirement Installation SiteSolar Agriculture-farm Installation BaseOpen Field Area, Agriculture-farm, Over 1800mm, Adjustable ground screwTilt angleUp to 30° or Customized tilt angle Max Wind Speed< 60m/s Snow Load< 80cm StandardsAS/NZS 1170 &JIS C 8955-2011 MaterialAnodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 ; Hot-dipped galvanized steel Q235B Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years
Description The Copper Lines Assembly, which is also called ground lug, connect the whole system to ground with wire by puncturing the anodizing film of rail,get a lighting and leakage protection effect.
Fixed Triangle Bracket For Flat Roof Mounting
The Flat Roof Solar Panel Mounting Triangle Bracket is pre-assebled in our factory, which save lost of your on site installing time and cost. All the components are full sides anodized even the cutting part of small components, which get a perfect anti-corrosion effect. Highly pre-assembly, easy installationPerfect also for small systems of 1,2,4 or 8 modulesFixed angle, adjustable angle both availableQuick mounting solution Components List Installation SiteCements Roof / Metal Roof Installation BaseRiveted or screwed onto raised corrugations on metal roof, ormounted onto the Concrete blockTilt angleUp to 60 degreesTilt angle: 10°, 15°, 20°, 30° (commonly used angle) Max Wind Speed< 60m/s Snow Load< 80cm StandardsAS/NZS 1170 &JIS C 8955-2011 MaterialAl6005-T5 for aluminum profiles and clampsStainless steel for fasten bolt and nut Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years
Fixed Triangle Bracket , 10-45deg
Product Highlights10-45° Adjustable Support Angle —— Fits various tilt installation demands, adapts different angled connection scenariosRigid Triangular Force Structure —— Evenly distributes bearing pressure, delivers lasting stable supporting performanceIntegrated Fixed Molding Design —— Reduces loose connection risks, no frequent maintenance after installationWide Aluminum Profile Compatibility —— Matches most common profile systems, no extra customized parts requiredProduct DescriptionThis fixed triangle bracket is a professional connection component customized for aluminum profile assembly systems. It is designed to provide reliablestructural support for joint positions that need to maintain a fixed angle within the 10 to 45 degrees range.The product follows the classical triangular stability principle in structural design to maintain consistent supporting effect under long-termnormal load. It does not require complicated pre-processing work, and can be put into use right aftermatching with corresponding profiles.Applicable Scenarios—— When assembling angled aluminum profile workstations for different processing operation demands—— When installing small-scale solar panel brackets to adjust the proper light receiving tilt angle—— When building sloped merchandise display racks in retail shops to keep items placed stably—— When fixing angled auxiliary handrails on industrial operation platforms for safer accessWarm TipsPlease confirm the actual tilt angle requirement of your installation site before purchase to avoid product mismatchMake sure the contact surfaces between the bracket and aluminum profiles are fully fitted during installationPlease do not apply load beyond the normal bearing range of the bracket to avoid unnecessary safety hazards This article was generated by AI and is for reference only.
Fixed Trapezoidal Metal Roof Mounting System
The universal solar metal roof clamp is suitable for most of the trapezoid metal roof, easy to install. It could be railless when panels been placed in landscape. Stably fixed on the rooftop. Light materialFull sides anodizingEasy to installSuitable for most of the trapezoid metal roof Use Rail Mounting Solution Railless Mounting Solution Install siteTrapezoid Metal RooftopMax Wind Speed≤60m/sSnow Load≤1.4KN/M2Tilt Angle0 degreeApplicable ModuleFramed or framelessStandardsAS/NZS 1170, ASCE 7-10, JIS2017MaterialAL6005-T5, SUS304Anti-corrosiveAnodizedColorSilverWarranty10 years warranty
Fix Triangle Bracket For Horizontal Placement
Product HighlightsDedicated horizontal fixation design —— Ensures lateral parts stay level and no easy displacement under loadTriangular force-bearing structure —— Evenly distributes pressure to reduce local stress of connection pointsSimple and labor-saving installation —— No complicated special tools required for quick mountingNon-slip contact surface treatment —— Enhances friction to prevent relative slip between connected partsProduct IntroductionThis Fix Triangle Bracket For Horizontal Placement is a specialized supporting fitting for aluminum profile assembly systems. Itis designed to achieve stable lateral connection and fixation between profile components, keeping all installedunits in a reliable horizontal state.Built based on mature mechanical principles, the product optimizes its structural logic to adapt to the force characteristicsof horizontal connection scenarios. It maintains long-term structural stability even under continuous regular load during daily use.Applicable Scenarios—— Assembling horizontal bearing platforms for industrial aluminum profile workbenches—— Fixing horizontal support frames of exhibition display racks in retail stores—— Installing horizontal guardrail parts of workshop safety isolation fences—— Connecting horizontal cross beams of customized aluminum profile storage systemsFriendly Reminders—— Please confirm the matching specification with your existing aluminum profiles before purchase—— Do not use the bracket beyond its applicable load range to avoid potential safety risks—— Regularly check the connection tightness for scenarios with high frequency of movement This article was generated by AI and is for reference only.
Double Glass Thin Film Solar Panel Mounting End Clamp
DescriptionThe Thin Film End Clamp for Solar Panel is made of aluminum AL6005-T5, combined with EPDM pads, tightly fasten the frameless panel on rails. It is workable for the thin film panels with thickness 6-10mm. Pre-assembled in factory which save your on site installing time and cost.FeaturesFast delivery Full sides anodizingPre-assembled in factoryLength: 120mm
Xiamen Kinsend Metal Tech.Co.,Ltd
Professional Solar Mounting Systems Designer And Manufacturer
Unit a, 6/f (BeiRongXin Building), No.8, Xinfeng 2nd Road, Torch Park, Torch High-Tech Park, Xiamen, China.
Powered by 300.cn Xiamen SEO