Products-pricelist Ground Solar Mounting Structure System factories-KINSEND

Solar Panel Anodized Universal Mid Clamp

DescriptionThe Universal U Shape Mid Clamp is applicable for the mounting of 30-50mm framed or frameless solar panel,the patented D block could be easily installed in the rails. Full sides anodizing, which get a perfect anti-corrosion effect. FeaturesEasy installation Full sides anodizingFast deliveryMostly for landscape placement

Solar Mid Clamps

Main material is AL6005-T5 with average 12μm anodizing film. Unique design of Mid & End clamps are used in different types of solar panels. Special design of rail can make intallation simpler and faster. Parts have been high pre-assembly on factory to save your installation time. Directly connect with rail, side fixedLow fitting costsEvery size of module array possibleFor all common rather distances Installation Site Fix solar panel , End clamp & Mid clampInstallation BaseSuit for panel thickness 30mm,35mm,40mmEconomic layoutLandscape/portraitMax Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170, DIN 1055, JIS C 8955:2011 Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years

Solar Balcony Mount Bracket

The balcony solar mount system is made of high-corrosion aluminum, lightweight and high-corrosion, and can be installed at different angles according to the requirements of sunlight exposure conditions. The balcony solar bracket be used on concrete flat roofs, balcony railings, gardens, garage roofs, etc. High corrosion resistanceEfficient installationlow cost Multi-angle adjustable design,Adjustable according to panel size. Details ApplicationGarden, flat ground, walls and etc. MaterialAL6005-T5, SUS304Tilt angle0 ° or 25° to 45° CertificateSGS , ISO9001 , CE Max Wind Speed< 60m/s Snow Load<1.4KN/m Length of solar module140~240cm , communicate with us custom design Width of solar module70~130cm , communicate with us custom design Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years

Slate Tile Roof Mounting System

Tile roof hooks are applied to solar installation on slate tiles, The tile hooks are compatible with most common rails and are made of stainless steel, Reasonable selection of solar mount installation accessories for fast installation. It will not cause damage to the tile surface, and the lightweight rail will not have too much weight pressure on the rooftop. Flexibility and AdjustabilityEasy and quick installed by using our bolts and nutsSuitable for installing framed and frameless modulesPre-assembled Components Save Onsite Installation Time Components List Installation Site Pitched roof with tiles Installation Base Slate tile roof_wooden beamRoof PitchUp to 60° Module orientationLandscape/portrait Max Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170 &JIS C 8955-2011 Material · Stainless steel 304 Hook Warranty / Duration 12 years/ More than 25 years Related Products

Ground Mounting System Ground Screw W Type

Ground mounting system is made of aluminum to mount on concrete foundation or ground screws，Quick installation with large-scale ground photovoltaic system power station construction progress.

Roman Tile Roof Solar Mounting Systems

The Roman Tile Roof Hook is exclusively designed for the solar panel mounting on roman tile roof. Just few steps with 4 components, easy to install. Workable for both frame and frameless modules. Full sides anodizing for aluminum componentsEasy to installFlexibility and Adjustability Components List Install siteRoman Tile RooftopMax Wind Speed≤60m/sSnow Load≤1.4KN/M2Tilt Angle0 degreeApplicable ModuleFramed or framelessStandardsAS/NZS 1170, ASCE 7-10, JIS2017MaterialAL6005-T5, SUS304Anti-corrosiveAnodizedColorSilverWarranty12 years warranty

Rail Splice Kit For Roof Mounting System

Rail Splice Kit For Roof Mounting System New profile Rail Splice Kit connection, Maintain the safety of the bracket, efficient use of profiles, reduce product costs, Let the profiles firmly together. Profile hardness requirements ≥13HWAfter machining the surface anodized treatment, the minimum film thickness ≥10μmBurr removal clean, sharp edge, sharp Angle are bluntFull sides anodizing Install siteRail Splice KitMax Wind Speed≤60m/sSnow Load≤1.4KN/M2Tilt Angle0 degreeApplicable ModuleFramed or framelessStandardsAS/NZS 1170, ASCE 7-10, JIS2017MaterialAL6005-T5, SUS304Anti-corrosiveAnodizedColorSilverWarranty12 years warranty

Rail Cap / Support Beam Cap/Rail Cover

Product HighlightsPrecision end sealing design -- Covers sharp exposed rail edges to prevent accidental scratches and cutsWide profile compatibility -- Fits most standard support beam and aluminum rail open ends stablyDurable solid construction -- Maintains good performance under long-term daily useTool-free press installation -- Locks in place firmly without extra mounting tools or partsProduct IntroductionThis series of rail caps, also known as support beam caps and rail covers, are dedicated finishing accessories foraluminum profile rail and support beam systems. It is developed to process exposed open ends of corresponding structures, reducing potential safety risksand optimizing the overall presentation of the whole frame.It follows mature production standards for industrial profile accessories, balancing practical functionality and neat appearance.No extra complex modification work is required for regular installation processes.Applicable Scenarios-- Installing finishing parts for home balcony handrail renovation projects -- Sealing exposed beam ends when assembling industrial operation platforms-- Upgrading safety details for outdoor garden fence and guardrail construction-- Decorating open ends of aluminum rails for exhibition booth buildingWarm Tips-- Confirm the inner dimension of your target rail or beam before purchase to get proper fit -- Clean the inner contact surface of the rail before installation for more stable fixing-- Avoid continuous contact with strong corrosive substances to extend the product service life This article was generated by AI and is for reference only.

Mini Mounting Rails For Solar Metals Mount

Lightweight rails can be installed on metal roofs, The U-shaped structure is a combination of guide rails and clamp. low cost and quick installation. Riveted or screwed onto raised corrugations. Every size of module array possibleSimple and fast installationNo Rails necessaryLow material / Low fiting costs Details Installation SiteTrapezoidal and corrugated sheet metal Installation BaseRiveted or screwed onto raised corrugation Max Wind Speed< 60m/s Snow Load< 80cm StandardsAS/NZS 1170 &JIS C 8955-2011 MaterialAl6005-T5 & Stainless steel Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years

Metal Roof Solar Panel Mount Tripod Angle Aluminum

Metal Roof Solar Panel Mount Tripod Angle Aluminum It can be installed on metal roof clamp or penetrate into concrete. Highly pre-assembly, easy installation Perfect also for small systems of 1,2,4 or 8 modules, Fixed angle, adjustable angle both available. Highly pre-assembly, easy installationFixed angle, adjustable angle both availableTilt angle: 5-45°Strong structure with most competitive price Installation Site Flat Roof or inclined metal/tin roofTilt angle5-45°Economic layoutLandscape/portrait , Perfect also for small systems of 1,2,4 or 8modules Max Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170, DIN 1055, JIS C 8955:2011 Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years Details

Metal Roof Lightweight Rail Standing Seam Clamp

L Foot Solar Roof Mounting Clamps For Wooden Beam

L feet brackets mainly applied to trapezoidal metal sheet roofs and corrugated metal sheet. It can be directly fixed on the roof beam with screw. Hanger bolt and Screw St6.3x80 apply to install on steel beam and Wooden beam. Making installation faster, competitive and reliable. Systems are fully compliant with international standards on wind & snow load. Low fitting costsEvery size of module array possibleHeight adjustable via elongated hole in the sheet metal bracketSuitable for large distances between rafters Installation Site Trapezoidal and corrugated sheet metalFasteningRiveted or screwed onto raised corrugatedEconomic layoutLandscape/portrait Max Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170, DIN 1055, JIS C 8955:2011 Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years Details

PRODUCTS