-
ABOUT USXiamen Kinsend Metal Tech Co., Ltd., is the main subsidiary of Fujian Shuangheng Group, which specialized in the designing and manufacturing of aluminum profiles over 30 years,with factory covering an area of 800,000 square meters.
-
PRODUCTSKinsend offers solar PV mounting solutions supported by a veteran R&D team, which provides tailored efficient design as per customer’s budget and project conditions.
-
PROJECTS
-
-
CONTACT US
undefined
PRODUCTS
Trapezoidal Metal Roof Mounting Clamp
Product HighlightsPrecise trapezoidal roof profile fit —— No extra roof cutting or modification during installation processDurable industrial metal build —— Withstand varied outdoor weather and extend long service periodNon-penetration clamping design —— Effectively eliminate potential roof water leakage hidden risksQuick on-site installation structure —— Shorten construction time and reduce overall installation labor costProduct IntroductionThis trapezoidal metal roof mounting clamp is a specialized connecting fitting developed for metal roof mounting projects. It is used to securely fasten different types of over-roof facilities on trapezoidalmetal roof surfaces without destroying the original waterproof structure.This product adopts standard industrial metal processing craft, and reserves sufficient adjustable range to fit mostcommon trapezoidal metal roof rib specifications in the market.Applicable Scenarios—— Installing distributed residential solar panel systems on trapezoidal metal roof—— Fixing outdoor ventilation pipelines for factory steel structure rooftops—— Mounting small signal communication antennas on workshop metal roof surfaces—— Installing safety protection guardrails for industrial trapezoidal metal roofsWarm TipsPlease confirm the actual trapezoidal rib size of your roof before placing the order for proper matchingPlease fasten the clamp to the specified tightness after installation to ensure stable load performancePlease conduct regular status check of clamps after long-term outdoor operation to avoid loose fixation This article was generated by AI and is for reference only.
Trapezoidal Metal Roof Hook High Strength
Product HighlightsHigh Strength Structure —— Offers reliable load-bearing capacity for long-time outdoor applicationTrapezoidal Roof Matching Design —— Fits standard trapezoidal metal roofs seamlessly without extra alterationFull Metal Construction —— Resists common outdoor erosion and deformation under variable weatherUser-friendly Installation —— No complicated pre-treatment needed, reduces on-site operation timeProduct IntroductionThis trapezoidal metal roof hook is a dedicated mounting accessory designed for trapezoidal metal roof systems, it is used to fix various roof-mounted facilities stably on the roof surface. It effectively reducesunnecessary damage to the original roof structure during installation, and retains the original waterproof performanceof the roof. This product adopts integral metal forming technology to ensure its structural consistency, no hidden weak points are lefton the main stress positions in the manufacturing process. It is optimized to fit the stress features of metalroof panels, preventing concentrated pressure damage to the roof under long-term use.Applicable Scenarios—— Installing solar panel support frames on residential trapezoidal metal rooftops—— Fixing small outdoor communication equipment brackets on factory metal roofs—— Mounting exterior safety guardrails on commercial building trapezoidal metal roofs—— Securing suspended exterior decorative fixtures on industrial metal roof surfacesFriendly Reminders—— Please confirm the specific structure of your trapezoidal metal roof before purchasing to ensure proper matching—— Please conduct regular firmness inspection of the hooks after long-term exposure to harsh outdoor conditions—— Please follow the standard installation steps strictly to avoid breaking the original roof waterproof layer This article was generated by AI and is for reference only.
Trapezoid Metal Roof L Feet Solar Mounting System
DescriptionThe aluminum L feet solar mounting system is widely used in commercial and residential metal rooftop, easy to install. System is stably installed on rooftop with self-tapping screw or hanger bolt, withstand heavy wind load. FeaturesWidely used on metal roofWithstand heavy wind speedLight materialFull sides anodizing Components List Technical Date Install siteTrapezoid / Corrugated Metal RooftopMax Wind Speed≤60m/sSnow Load≤1.4KN/M2Tilt Angle 0 degreeApplicable ModuleFramed or framelessStandardsAS/NZS 1170, ASCE 7-10, JIS2017MaterialAL6005-T5, SUS304Anti-corrosiveAnodizedColorSilverWarranty10 years warranty Production Processes
Standing Seam Roof Mounting System
Product HighlightsNon-piercing clamping design —— Eliminates roof leakage risks, fully preserves original roof integrityWide profile adaptability —— Fits most standing seam roof types without extra on-site modificationQuick on-site installation —— Reduces working time, effectively cuts unnecessary labor costAll-weather durability —— Stays stable under harsh outdoor conditions for long service periodProduct IntroductionThis standing seam roof mounting system is a dedicated fixture solution developed for standing seam metal roof structures, mainly used to secure solar panels, small rooftop facilities and other fixtures without damaging the original roof surface. It removes the need for drillingthrough roof panels to maintain the native waterproof performance of the whole roof system.All parts of the system are made of anti-corrosion, non-abrasive materials to fit the long-term outdoor usage scenario, with nosharp burrs that may scratch the roof coating. The reserved adjustment margin allows proper fine-tuning of installation positions tomeet different layout demands of rooftop projects.Applicable Scenarios—— Installing residential solar panel arrays on standing seam metal roofs—— Mounting small communication facilities on industrial factory rooftops—— Fixing solar water heater systems on rural self-built housing roofs—— Deploying rooftop billboard brackets on downtown commercial buildingsFriendly Reminders—— Please confirm the specific profile and load-bearing capacity of your standing seam roof before purchasing—— Do not install the mounting clamps on deformed or corroded standing seam sections to avoid safety risks—— Check the fastening status of the system after extreme weather such as heavy storms regularly This article was generated by AI and is for reference only.
Standing Seam Metal Roof Mounting Clamp
Product HighlightsPerfect fit for standing seam metal roofs -- No drilling or penetration to original roof structureRobust fastening performance -- Holds rooftop mounted fixtures stably for long termQuick installation design -- Reduces on-site working hours and lowers labor inputCorrosion resistant construction -- Adapts to various harsh outdoor weather conditionsProduct IntroductionNote: All content below is inferred based on general characteristics of this product categoryThis standing seam metal roof mounting clamp is a professional fastening component for rooftop installation works. It enables secure connection of mounting supports to the standing seam of metal roofs, without extra piercing operation onthe roof waterproof layer.The product follows structural design logic that matches the stress feature of metal standing seams, to avoid unintended roof damage during daily usage. Nocomplicated modification work is required for compatible roof types, to improve overall construction efficiency.Applicable Scenarios-- Mounting residential solar panel arrays on standing seam metal rooftops-- Installing commercial outdoor communication antennas on industrial metal roofs-- Fixing rooftop safety guardrails for factory building metal roofing systems-- Attaching outdoor landscape lighting brackets on public building metal roofsWarm Tips-- Please verify the standing seam dimension of your target roof before purchase for proper compatibility-- Regular inspection of clamp tightness is suggested after severe weather to ensure mounting safety-- Do not apply this clamp on non-standing-seam roof structures outside the product's applicable range This article was generated by AI and is for reference only.
Standing Seam Clamp Roof Panels Mount
Product HighlightsNo roof drilling required —— Preserve original roof waterproof structure, no hidden leak riskCustom fit for standing seam panels —— Clamp closely to seam edge without slipping offEasy fast installation process —— Complete single-person fixation work in short timeDurable outdoor grade construction —— Resist rust and aging for long service lifeProduct IntroductionThis standing seam clamp roof panels mount is a purpose-built connection hardware for standing seam metal roof systems, which provides stable mounting pointsfor various rooftop facilities. It avoids destructive drilling on the roof panel surface to fully retain the original waterproof performance of the roofingstructure. The mount is manufactured with mature metal forming technology, with stable structural strength suitable for long-term outdoor exposure. It fits the common radian of standing seam panels perfectly to ensure reliable connection status in different weather conditions.Applicable Scenarios—— Installing solar panel support brackets on standing seam metal residential roofs—— Mounting outdoor commercial billboards on the rooftop of industrial workshop buildings—— Fixing HVAC outdoor units and ventilation pipelines on standing seam roofing systems—— Installing safety guardrails for regular rooftop maintenance operationsFriendly RemindersConfirm the actual size of your standing seam roof seam before purchase to ensure matching fitCheck the fastening status of the clamps periodically after long-term exposure to extreme weatherDo not overload the mount when installing heavy rooftop facilities to avoid safety hazards This article was generated by AI and is for reference only.
Stainless Steel Standing Seam Metal Roof Mounting Clamp
Product HighlightsStainless Steel Construction —— Delivers excellent rust and corrosion resistance for long outdoor service lifeStanding Seam Dedicated Design —— Fits seamlessly with the profile of common standing seam metal roofsNon-piercing Mounting Mode —— No drilling on roof panels, completely eliminates hidden leakage risksHigh Clamping Stability —— Holds attached fixtures firmly against extreme weather like heavy windThe following information is inferred based on general characteristics of this product categoryProduct IntroductionThis mounting clamp is a specialized connecting fitting developed for standing seam metal roofing systems,it provides reliable fixing points for various roof-mounted attachments without destroying the integrity of the original roof structure.The product adopts precision forming process to ensure uniform stress on the contact area with the roof panel,no special pre-processing is required during the whole installation process to lower operation difficulty.Applicable Scenarios—— Installing solar panel support frames on standing seam metal roofs of industrial factories—— Fixing roof safety guardrails on metal roofing of commercial office buildings—— Mounting outdoor advertisement brackets on the standing seam roof of retail stores—— Installing ventilation system accessories on large-span public building metal roofsFriendly RemindersPlease confirm the specific size of your roof standing seam before purchase to get proper matching product.Do not apply this clamp on non-standing seam roof structures to avoid insufficient fixing strength.It is suggested to check the clamping tightness periodically after long time of outdoor usage.This article was generated by AI and is for reference only.
L Feet Kits Metal Roof With Steel Beam, 165mm Height
Metal Roof Solar Mounting System Solar Hanger Bolt Solar L Feet ,Parts have been high pre-assembly on factory to save your installation time.Install in Trapezoidal and corrugated sheet metal. Height adjustable via elongated hole in the sheet metal bracket. Low fitting costsEvery size of module array possibleHeight adjustable via elongated hole in the sheet metal bracketSuitable for large distances between rafters Installation Site Trapezoidal and corrugated sheet metalFasteningRiveted or screwed onto raised corrugatedEconomic layoutLandscape/portrait Max Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170, DIN 1055, JIS C 8955:2011 Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years
Klip Lok Solar Roof Mounting Clamp
Product HighlightsKlip Lok Seam Dedicated Fit —— Snugly locks roof seam, no damage to original roof waterproof layerStable Solar Panel Fixing —— Holds panels firmly under harsh weather, reduces later maintenance needsQuick Easy Installation —— Simplifies on-site operation, cuts unnecessary construction stepsAnti-corrosion Surface Treatment —— Adapts to long-term outdoor use, extends whole service lifeProduct IntroductionThis Klip Lok Solar Roof Mounting Clamp is a specialized connecting hardware for photovoltaic system installation onKlip Lok standing seam metal roofs. It is designed to fasten solar mounting support rails directly tothe roof seam structure, without needing to drill holes through the roof surface. It avoids the hidden leakage risk brought by traditionalperforated roof installation methods.The product is developed following general photovoltaic accessory manufacturing specifications, to matchmost mainstream solar panel mounting systems on the market. Its reasonable structural design takes intoaccount the common load demand of rooftop solar projects, to deliver reliable performance in long-term outdoor operation scenarios.Applicable Scenarios—— Deploying new residential rooftop solar systems on Klip Lok metal sheet roofs—— Retrofitting extra solar panels on existing Klip Lok industrial factory roofs—— Replacing aged mounting clamps for small commercial distributed solar stations—— Re-fastening loosened solar fixtures after extreme weather strikes on rooftop PV projectsFriendly Reminders—— Please confirm the actual dimension of your Klip Lok roof seam before ordering for proper matching—— Do not apply this clamp on non-Klip Lok structure roofs without professional load verification—— Please operate in accordance with standard PV installation procedures to ensure overall structural safety This article was generated by AI and is for reference only.
Aluminum Metal Roof Clamp Stand Seam Type
Product HighlightsSeam-locked non-penetrating design —— No roof drilling to reduce water leakage risksAll aluminum material build —— Resist long-term outdoor rust for extended service lifeTool-free quick installation structure —— Cut on-site construction time and labor costBroad seam adaptability —— Fit most common standing seam metal roof typesProduct IntroductionThis seam type aluminum metal roof clamp stand is a specialized fixing accessory developed for rooftop installation scenarios. It can fasten tightly on the seam positionof metal roof panels without piercing the roof structure.It adopts integrated forming aluminum manufacturing process, with smooth contact surfaces that will not scratch the original protective coating ofthe roof. The force-bearing structure is optimized to deliver stable holding performance for long term outdoor usage.Applicable ScenariosInstalling residential small distributed solar panels on standing seam metal roofsMounting outdoor signal booster antennas on industrial plant metal rooftopsSecuring outdoor cabling and pipe attachments on large warehouse metal roofsInstalling meteorological monitoring sensors on public building metal roof areasFriendly RemindersVerify the actual seam dimension of your metal roof before purchasing for proper matchingCheck the clamping tightness periodically after extreme weather events for safetyDo not apply this clamp on non-metal roof types outside its designed usage range This article was generated by AI and is for reference only.
Alumunum Metal Roof Mount Clamp Stand Seam
Product HighlightsSolid Aluminum Structure —— Excellent corrosion resistance for long-term outdoor rooftop applicationPrecision Seam Matching —— Fits tightly on roof seams without drilling to avoid water leakageQuick Installation Design —— No extra special tools required to cut on-site mounting timeStable Locking Performance —— Firmly holds mounted equipment to prevent unexpected slippingProduct IntroductionThis aluminum metal roof mount clamp stand is a dedicated fixing component for standing seam metal rooftops, developed to deliver reliable connection support for variousrooftop installed facilities. It avoids punching holes on the original roof surface, effectively loweringthe hidden risk of roof damage caused by improper installation.The product adopts optimized structural design targeting common metal roof seam shapes, and balances overall strength and light weight property to adapt to all kinds of harshoutdoor weather conditions.Application Scenarios—— Mounting residential household small solar power systems on standing seam metal roofs —— Fixing safety monitoring equipment brackets on industrial plant metal rooftop seams—— Deploying small outdoor communication antennas on commercial building rooftops—— Installing rooftop auxiliary fixtures for prefabricated temporary construction housesFriendly Reminders—— Please confirm the actual size and structure of your metal roof seam before purchase for proper matching—— Regular tightness check of the clamp is suggested after long exposure to strong wind or heavy rain—— Do not alter the original structure of the clamp arbitrarily to avoid performance degradationThis article was generated by AI and is for reference only.
Klip Lok Solar Mounting Metal Rooftop Clamp
Product HighlightsDedicated for Klip Lok profile roofs —— Perfectly fits matching roof structure without extra adaptationNon-penetrating clamping design —— No drilling on roof surface to avoid water leakage risksReliable structural stability —— Firmly holds solar mounting parts under various outdoor conditionsTool-friendly quick installation —— Shorten on-site construction time with simplified operationstepsProduct IntroductionThis Klip Lok Solar Mounting Metal Rooftop Clamp is a specialized fastening component for photovoltaic system deployment on metal rooftops. It acts as the core connection part to secure solar mounting brackets to Klip Lok type metal roof substrates, nodestructive modification on the roof is required during installation.This product is optimized for long-term outdoor service scenarios, with anti-corrosion structure design to adapt to different regional climate environments.It follows user-oriented design principle that gives priority to construction convenience and original roof structure protection for solar projectteams.Applicable Scenarios—— On-site construction of new solar power stations on industrial Klip Lok metal rooftops—— Distributed photovoltaic renovation for existing factory buildings with metal roofs—— Photovoltaic system deployment on commercial building standing-seam metal rooftops—— Small residential solar panel mounting for Klip Lok roofed sunroomsFriendly Reminders—— Please verify the compatibility between the clamp and your specific Klip Lok roof profile before purchasing—— Please check the clamping tightness regularly after extreme weather impact in later operation—— Do not apply this product to non-Klip Lok type roof structures to avoid potential safety risks This article was generated by AI and is for reference only.
Xiamen Kinsend Metal Tech.Co.,Ltd
Professional Solar Mounting Systems Designer And Manufacturer
Unit a, 6/f (BeiRongXin Building), No.8, Xinfeng 2nd Road, Torch Park, Torch High-Tech Park, Xiamen, China.
Powered by 300.cn Xiamen SEO