-
ABOUT USXiamen Kinsend Metal Tech Co., Ltd., is the main subsidiary of Fujian Shuangheng Group, which specialized in the designing and manufacturing of aluminum profiles over 30 years,with factory covering an area of 800,000 square meters.
-
PRODUCTSKinsend offers solar PV mounting solutions supported by a veteran R&D team, which provides tailored efficient design as per customer’s budget and project conditions.
-
PROJECTS
-
-
CONTACT US
undefined
PRODUCTS
Thin Film Solar Panel Mounting Mid Clamp
DescriptionThe Thin Film Mid Clamp for Solar Panel is made of aluminum AL6005-T5, combined with EPDM pads, tightly fasten the frameless panel on rails. It is workable for the panels with thickness 6-10mm. Pre-assembled in factory which save your on site installing time and cost.FeaturesFast delivery Full sides anodizingPre-assembled in factoryLength: 120mm
Stainless Steel Earthing Clip For Solar System
Description The Ground Clip helps to connect the whole system to ground by puncturing the anodizing film of rail, get a lighting and leakage protection effect.
Solar Panel Anodized Universal Mid Clamp
DescriptionThe Universal U Shape Mid Clamp is applicable for the mounting of 30-50mm framed or frameless solar panel,the patented D block could be easily installed in the rails. Full sides anodizing, which get a perfect anti-corrosion effect. FeaturesEasy installation Full sides anodizingFast deliveryMostly for landscape placement
Main material is AL6005-T5 with average 12μm anodizing film. Unique design of Mid & End clamps are used in different types of solar panels. Special design of rail can make intallation simpler and faster. Parts have been high pre-assembly on factory to save your installation time. Directly connect with rail, side fixedLow fitting costsEvery size of module array possibleFor all common rather distances Installation Site Fix solar panel , End clamp & Mid clampInstallation BaseSuit for panel thickness 30mm,35mm,40mmEconomic layoutLandscape/portraitMax Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170, DIN 1055, JIS C 8955:2011 Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years
Rail Splice Kit For Roof Mounting System
Rail Splice Kit For Roof Mounting System New profile Rail Splice Kit connection, Maintain the safety of the bracket, efficient use of profiles, reduce product costs, Let the profiles firmly together. Profile hardness requirements ≥13HWAfter machining the surface anodized treatment, the minimum film thickness ≥10μmBurr removal clean, sharp edge, sharp Angle are bluntFull sides anodizing Install siteRail Splice KitMax Wind Speed≤60m/sSnow Load≤1.4KN/M2Tilt Angle0 degreeApplicable ModuleFramed or framelessStandardsAS/NZS 1170, ASCE 7-10, JIS2017MaterialAL6005-T5, SUS304Anti-corrosiveAnodizedColorSilverWarranty12 years warranty
Rail Cap / Support Beam Cap/Rail Cover
Product HighlightsPrecision end sealing design -- Covers sharp exposed rail edges to prevent accidental scratches and cutsWide profile compatibility -- Fits most standard support beam and aluminum rail open ends stablyDurable solid construction -- Maintains good performance under long-term daily useTool-free press installation -- Locks in place firmly without extra mounting tools or partsProduct IntroductionThis series of rail caps, also known as support beam caps and rail covers, are dedicated finishing accessories foraluminum profile rail and support beam systems. It is developed to process exposed open ends of corresponding structures, reducing potential safety risksand optimizing the overall presentation of the whole frame.It follows mature production standards for industrial profile accessories, balancing practical functionality and neat appearance.No extra complex modification work is required for regular installation processes.Applicable Scenarios-- Installing finishing parts for home balcony handrail renovation projects -- Sealing exposed beam ends when assembling industrial operation platforms-- Upgrading safety details for outdoor garden fence and guardrail construction-- Decorating open ends of aluminum rails for exhibition booth buildingWarm Tips-- Confirm the inner dimension of your target rail or beam before purchase to get proper fit -- Clean the inner contact surface of the rail before installation for more stable fixing-- Avoid continuous contact with strong corrosive substances to extend the product service life This article was generated by AI and is for reference only.
Description The Copper Lines Assembly, which is also called ground lug, connect the whole system to ground with wire by puncturing the anodizing film of rail,get a lighting and leakage protection effect.
Fixed Triangle Bracket , 10-45deg
Product Highlights10-45° Adjustable Support Angle —— Fits various tilt installation demands, adapts different angled connection scenariosRigid Triangular Force Structure —— Evenly distributes bearing pressure, delivers lasting stable supporting performanceIntegrated Fixed Molding Design —— Reduces loose connection risks, no frequent maintenance after installationWide Aluminum Profile Compatibility —— Matches most common profile systems, no extra customized parts requiredProduct DescriptionThis fixed triangle bracket is a professional connection component customized for aluminum profile assembly systems. It is designed to provide reliablestructural support for joint positions that need to maintain a fixed angle within the 10 to 45 degrees range.The product follows the classical triangular stability principle in structural design to maintain consistent supporting effect under long-termnormal load. It does not require complicated pre-processing work, and can be put into use right aftermatching with corresponding profiles.Applicable Scenarios—— When assembling angled aluminum profile workstations for different processing operation demands—— When installing small-scale solar panel brackets to adjust the proper light receiving tilt angle—— When building sloped merchandise display racks in retail shops to keep items placed stably—— When fixing angled auxiliary handrails on industrial operation platforms for safer accessWarm TipsPlease confirm the actual tilt angle requirement of your installation site before purchase to avoid product mismatchMake sure the contact surfaces between the bracket and aluminum profiles are fully fitted during installationPlease do not apply load beyond the normal bearing range of the bracket to avoid unnecessary safety hazards This article was generated by AI and is for reference only.
Fix Triangle Bracket For Horizontal Placement
Product HighlightsDedicated horizontal fixation design —— Ensures lateral parts stay level and no easy displacement under loadTriangular force-bearing structure —— Evenly distributes pressure to reduce local stress of connection pointsSimple and labor-saving installation —— No complicated special tools required for quick mountingNon-slip contact surface treatment —— Enhances friction to prevent relative slip between connected partsProduct IntroductionThis Fix Triangle Bracket For Horizontal Placement is a specialized supporting fitting for aluminum profile assembly systems. Itis designed to achieve stable lateral connection and fixation between profile components, keeping all installedunits in a reliable horizontal state.Built based on mature mechanical principles, the product optimizes its structural logic to adapt to the force characteristicsof horizontal connection scenarios. It maintains long-term structural stability even under continuous regular load during daily use.Applicable Scenarios—— Assembling horizontal bearing platforms for industrial aluminum profile workbenches—— Fixing horizontal support frames of exhibition display racks in retail stores—— Installing horizontal guardrail parts of workshop safety isolation fences—— Connecting horizontal cross beams of customized aluminum profile storage systemsFriendly Reminders—— Please confirm the matching specification with your existing aluminum profiles before purchase—— Do not use the bracket beyond its applicable load range to avoid potential safety risks—— Regularly check the connection tightness for scenarios with high frequency of movement This article was generated by AI and is for reference only.
Double Glass Thin Film Solar Panel Mounting End Clamp
DescriptionThe Thin Film End Clamp for Solar Panel is made of aluminum AL6005-T5, combined with EPDM pads, tightly fasten the frameless panel on rails. It is workable for the thin film panels with thickness 6-10mm. Pre-assembled in factory which save your on site installing time and cost.FeaturesFast delivery Full sides anodizingPre-assembled in factoryLength: 120mm
This clamp for fix rails . Main material is AL6005-T5 with average 12μm anodizing film. Unique design of Mid & End clamps are used in different types of solar panels. Special design of rail can make intallation simpler and faster. Parts have been high pre-assembly on factory to save your installation time. Solar clamps can work with most types of solar panels and rails.Quick and easy installationStrict QC over all components ensure the high reliability of the strengthMade of aluminum, each section is anodized Economic layoutLandscape/portrait Max Wind Speed< 60m/s Snow Load< 80cm StandardsAS/NZS 1170, DIN 1055, JIS C 8955:2011 MaterialAnodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years Details
Anodized Aluminum Z Shape End Clamp For Solar Mounting
DescriptionThe Universal Z Shape End Clamp is applicable for the mounting of 30-50mm framed or frameless solar panel,the patented D block could be easily installed in the rails. Full sides anodizing, which get a perfect anti-corrosion effect. FeaturesEasy installation Full sides anodizingFast delivery
Xiamen Kinsend Metal Tech.Co.,Ltd
Professional Solar Mounting Systems Designer And Manufacturer
Unit a, 6/f (BeiRongXin Building), No.8, Xinfeng 2nd Road, Torch Park, Torch High-Tech Park, Xiamen, China.
Powered by 300.cn Xiamen SEO