Products-pricelist Ground Solar Mounting Structure System factories-KINSEND

Adjustable Foot _Flat Roof and Metal Roof Solar Mounting System

The adjustable solar roof mounting systems could be fixed or adjustable tilt, meeting project specific adjustments to optimize the solar output.

Ballast Solution Flat rooftop System Clamp Support

Ballast tripod flat rooftop mounting system is a type of solar panel mounting system that is designed for flat rooftops. This system uses a tripod structure that is weighted down with ballasts to provide a stable and secure foundation for the solar panels.

U Shape Aluminium Rails _Quickly Metal Mounting

Lightweight rails can be installed on metal roofs, The U-shaped structure is a combination of guide rails and clamp. low cost and quick installation. Riveted or screwed onto raised corrugations. Every size of module array possible Simple and fast installation No Rails necessary Low material / Low fiting costs Details Installation Site Trapezoidal and corrugated sheet metal Installation Base Riveted or screwed onto raised corrugation Max Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170 &JIS C 8955-2011 Material Al6005-T5 & Stainless steel Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years

Metal rooftop triangle bracket mounting system

The metal rooftop triangle bracket mounting system is a type of mounting system designed for metal rooft.. It uses triangular-shaped brackets that are attached to the metal roof using screws or other fasteners.

Tile Roof Mounting System

Solar Stainless Steel Hook ,Custom-made solar tile hooks based on tile specifications,They have adjustable and fixed tile hook type for choice.

Agricultural solar mounting system_Ground Screw

Agricultural solar mounting systems can make use of land that may not be otherwise suitable for farming or other uses, such as sloping or rocky land. Fram solar mounting bracket are designed to be durable and long-lasting,

Ground Mounting System _Sandy Area

Double blade ground screw foundation ground system, suitable for sandy environment, with strong structural stability, Parts have been high pre-assembly on factory to save your installation time. Products using aluminum alloy 6005-T5 (AL6005-T5) and stainless steel 304 (SUS304), high strength, corrosion resistance is good. Ground screws and concrete foundations optional. there is no need to drilling,cutting and other operations on site,simply adjust locking to complete the installation. ◆ Simple and fast installation◆ high pre-assembly on factory to save your installation time◆ Ground screw foundation and concrete foundation acceptable◆ High corrosion resistance, anodized aluminum profiles Installation SiteOpen Field Area_Aluminum ground mounting systemInstallation BaseGround screws and concrete foundations optionalTilt angle0°- 45°Max Wind Speed< 60m/sSnow Load< 80cmStandardsAS/NZS 1170 &JIS C 8955-2011MaterialAl6005-T5 for aluminum profiles and clamps.Stainless steel for fasten bolt and nut.Anti-corrosiveAnodizedWarranty / Duration12 years/ More than 25 years

Waterproof Solar Structure For Car Parking

Solar carport Mounting System adopts anodized aluminum material，40% components are pre-assembled in factory ensure the bracket with fast installation Save your labor costs. The panel can be directly installed on the waterproof carport structure, and the quickly installed waterproof guide rail makes the entire system more concise and beautiful. Excellent waterproof performance High corrosion resistance, anodized aluminum profilesHigh pre-assembly on factory to save your installation time Building on parking lot, saving land resources Installation Site Open Field Area, or Supper Mall Parking Area , Installation Base Concrete base, Ground Clearance Over 2000mmTilt angleUp to 20° or Customized tilt angleEconomic layoutCustomized waterproof rail 3 rows of modules with vertical assembly6 rows of modules with horizontal assembly Max Wind Speed < 60m/s Snow Load < 80cm Standards AS/NZS 1170 &JIS C 8955-2011 Material Anodized aluminum 6005 T6 , Fasten bolt and nut stainless steel 304 Anti-corrosive Anodized Warranty / Duration 12 years/ More than 25 years Details

Universal Trapezoidal Rooftop Mounting System

Universal metal tin roof clamp with strong flexibility and easy installation on trapezoidal type metal rooftop. The perfect combination with CR series rails ensures efficient installation of the entire system and ensures its safety Light materialFull sides anodizingEasy to installSuitable for most of the trapezoid metal roof Component List Install siteTrapezoid Metal RooftopMax Wind Speed≤60m/sSnow Load≤1.4KN/M2Tilt Angle0 degreeApplicable ModuleFramed or framelessStandardsAS/NZS 1170, ASCE 7-10, JIS2017MaterialAL6005-T5, SUS304Anti-corrosiveAnodizedColorSilverWarranty10 years warranty

Triangle Portable Home Solar Panel Mounting

Product HighlightsTriangular stable structure —— Fix solar panels firmly, prevent shifting in daily useLightweight portable form —— Easy to move around and carry to different locationsTool-free quick installation —— No extra complex tools, finish setup in short timeHome solar panel compatible —— Fits most regular size household portable solar panelsProduct IntroductionThis triangle portable home solar panel mounting is a specialized supporting accessory for residential portable solar equipment. It is designed to hold solar panels at a reasonable tilt angle for better sunlight reception,no complicated pre-installation procedures required.The product follows the triangular force dispersion principle for structural design, and uses durable material to withstand regular outdoor use wear forextended service period.Applicable Scenarios—— Set up on backyard lawn to support solar panels for daytime small device charging—— Place on residential balcony to mount portable solar units for daily household power supplement—— Carry to family outdoor picnic spots to arrange solar panels for off-site power supply—— Put on flat residential roof to temporarily deploy small home solar power systemsWarm Tips—— Please check the load bearing limit matches your solar panel weight before application—— Always place the mounting on flat solid surface to avoid unexpected tipping over—— Do not leave the mounting under extreme harsh weather for overly long time This article was generated by AI and is for reference only.

Trapezoidal Metal Roof Mounting Clamp

Product HighlightsPrecise trapezoidal roof profile fit —— No extra roof cutting or modification during installation processDurable industrial metal build —— Withstand varied outdoor weather and extend long service periodNon-penetration clamping design —— Effectively eliminate potential roof water leakage hidden risksQuick on-site installation structure —— Shorten construction time and reduce overall installation labor costProduct IntroductionThis trapezoidal metal roof mounting clamp is a specialized connecting fitting developed for metal roof mounting projects. It is used to securely fasten different types of over-roof facilities on trapezoidalmetal roof surfaces without destroying the original waterproof structure.This product adopts standard industrial metal processing craft, and reserves sufficient adjustable range to fit mostcommon trapezoidal metal roof rib specifications in the market.Applicable Scenarios—— Installing distributed residential solar panel systems on trapezoidal metal roof—— Fixing outdoor ventilation pipelines for factory steel structure rooftops—— Mounting small signal communication antennas on workshop metal roof surfaces—— Installing safety protection guardrails for industrial trapezoidal metal roofsWarm TipsPlease confirm the actual trapezoidal rib size of your roof before placing the order for proper matchingPlease fasten the clamp to the specified tightness after installation to ensure stable load performancePlease conduct regular status check of clamps after long-term outdoor operation to avoid loose fixation This article was generated by AI and is for reference only.

Trapezoidal Metal Roof Hook High Strength

Product HighlightsHigh Strength Structure —— Offers reliable load-bearing capacity for long-time outdoor applicationTrapezoidal Roof Matching Design —— Fits standard trapezoidal metal roofs seamlessly without extra alterationFull Metal Construction —— Resists common outdoor erosion and deformation under variable weatherUser-friendly Installation —— No complicated pre-treatment needed, reduces on-site operation timeProduct IntroductionThis trapezoidal metal roof hook is a dedicated mounting accessory designed for trapezoidal metal roof systems, it is used to fix various roof-mounted facilities stably on the roof surface. It effectively reducesunnecessary damage to the original roof structure during installation, and retains the original waterproof performanceof the roof. This product adopts integral metal forming technology to ensure its structural consistency, no hidden weak points are lefton the main stress positions in the manufacturing process. It is optimized to fit the stress features of metalroof panels, preventing concentrated pressure damage to the roof under long-term use.Applicable Scenarios—— Installing solar panel support frames on residential trapezoidal metal rooftops—— Fixing small outdoor communication equipment brackets on factory metal roofs—— Mounting exterior safety guardrails on commercial building trapezoidal metal roofs—— Securing suspended exterior decorative fixtures on industrial metal roof surfacesFriendly Reminders—— Please confirm the specific structure of your trapezoidal metal roof before purchasing to ensure proper matching—— Please conduct regular firmness inspection of the hooks after long-term exposure to harsh outdoor conditions—— Please follow the standard installation steps strictly to avoid breaking the original roof waterproof layer This article was generated by AI and is for reference only.

PRODUCTS